- Ring25
- Stone11
- Setting5
- Reports4
























Three Stone Purple Spinel Ring 2.64 Ct., 14K Yellow Gold
Wax Polymer Replica
Model of your Completed
Setting Design!

View 360° media
Item ID: | K16953 |
|---|---|
Dimensions (MM): help | Length: 8.49 Width: 7.36 Height: 5.92 |
Weight: | 2.64 Ct. |
Color: help | Purple |
Color intensity: help | Light |
Clarity: help | Very Slightly Included |
Shape: help | Oval |
Cut: | Mixed Brilliant Cut |
Cutting style: | Faceted |
Enhancements: help | No Enhancement |
Origin: help | Tanzania |
Per carat price: help | $512 |
This ring centers a transparent purple spinel of 2.64 carats, oval shape, with dimensions 8.49 x 7.36 x 5.92 mm, cut in a mixed brilliant configuration to balance scintillation and color distribution. The mixed brilliant cutting places a well proportioned table and a crown with varied brilliant facets above a pavilion optimized for controlled light return, producing strong face up brightness while preserving the stone's light color saturation and subtle lilac tone. The spinel is graded very slightly included at eye level, and it displays an excellent polish that yields crisp facet junctions and minimal surface disturbance. Origin is Tanzania. Complementary stones are white pear shaped natural diamonds totaling approximately 0.30 carats, clarity graded VS1 and VS2, color F, plus assemblies of white round natural diamonds weighing approximately 0.15 carats, 0.308 carats, and 0.06 carats, each graded VS clarity and F to G color. These side stones are set in precision prong and micro pavé placements along the shoulder, with careful bead and burnish setting technique used to seat small melee diamonds into the 14K yellow gold band, maintaining even spacing and secure metal partitioning between stones. The mounting employs a four claw basket and raised gallery that allows pavilion light to enhance the mixed brilliant spinel, while the shoulder pear diamonds act as architectural anchors that integrate with the pavé line, all executed with tight symmetry and hand finished polish on the gold work.
When assessed for durability relative to similar designs on the market, this ring benefits from material and structural choices that prioritize longevity. The 14K yellow gold alloy used offers greater hardness and scratch resistance than 18K gold, and it is less prone to deformation than higher karat formulations, while still providing sufficient malleability for precise setting work, and it is more forgiving to reworking and sizing than platinum which can cold work and require specialized maintenance. The 2.64 carat spinel rates approximately eight on the Mohs scale, making it substantially more resistant to daily abrasion than many semi precious alternatives, though inherently softer than diamond, so exposed prong heads remain the primary vulnerability under hard impact. Compared to bezel or low profile designs, the elevated four claw basket provides superior light performance at a modest trade off in potential snagging risk, however The Natural Gemstone Company mitigates this by employing reinforced prongs, thicker crowns at stress points, and secure bead set pavé with adequate metal between melee, which reduces the likelihood of stone loss relative to thin channel pavé or minimally shelled mountings. Routine professional inspection and occasional prong re tipping are recommended to preserve the setting integrity and long term performance.












































